HOME SADDLEBAGS T-OVER TOOL BAGS SISSY BAR BAGS ACCESSORIES GALLERY CONTACT US COMMENTS
 

Stinger

Trunk Bags

Detach Brackets

Buckles

Beverage Holder
Brackets are included in the Saddlebag price!
EZ BRACKETS $154.99

HARLEY DAVIDSON - All Softails, including Fatboy.

Sku#
  • FXST/FXSTI Softail StandardFXSTB/FXSTBI Night Train
  • FXSTS/FXSTSI Springer Softail
  • FXSTC 2007 Softail Custom
  • FLSTF/FLSTFI Fat Boy
  • FLSTN/FLSTNI Softail Deluxe, Heritage Nostalgia & Heritage Special Note: The Softail Deluxe works with the ST-L1, ST-L1HB, ST-L1DB and ST-L1SDDB
  • FLSTS/FLSTSI Heritage Springer (Does not fit Factory Saddlebags)
  • FLSTSC/FLSTSCI Softail Springer ClassicFXSTD/FXSTD1 Deuce
Model Number Model Year Model Picture
ST-R1
(all model years except 2006 & later
FXST, FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC, see ST-R2)

This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB).�

The docking posts attach to the front two mounting holes in the fender rail. (6 1/4" apart). If turn signals are to be relocated see ST-L1.


(If you have a backrest see kits ST-R1HB and ST-R1DB)

For Deuce, see its separate listing below.
  Fits all model years except 06' & Later FXST, FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC ST-R1

ST-R1HB
Used with a Hardmount Backrest
This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased seperately.
  Fits all model years except 06' & Later FXST, FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC ST-R1HB

ST-R1DB
Used with a quick detachable backrest.
This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be puchased seperately.
  Fits all model years except 06' & Later FXST, FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC ST-R1DB

ST-R3HB
FXSTC 2007 Softail Custom
This model is used on the 2007 FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5 5/8” apart)  If turn signals are to be relocated see ST-L1.� If�the stock backrest is replaced with the detachable backrest use ST-R2DB.

Fits all 07' model years ST-R3HB

ST-L1
All models

Not used with factory Heritage saddlebags. See HRT Models. This model is used on all softail models. The docking posts attach to the rear two mounting holes in the fender rail (9 1/4" apart). Turn signals must be relocated off the fender to use all ST-L1 models.

Harley Davidson Deluxe will need the ST-L1 brackets.
If your Deluxe has a hardmount backrest you need the ST-L1HB and if you
have a detachable backrest you need the ST-L1DB

Fits all model years ST-L1

ST-L1HB
Used with Hardmount Backrest
All Softails with Hardmount Backrest. This is the same bracket as the ST-L1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.
  Fits all model years ST-L1HB

ST-L1DB
Used with detachable backrest
All Softails with Detachable Backrest. Will work with Softail Deluxe with Standard Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
  Fits all model years ST-L1DB

ST-L1SDDB
Used with deluxe detachable backrest.
FLSTN: Softail Deluxe with New Deluxe Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The backrest is not provided and must be purchased seperately.
  Fits all model years ST-L1SDDB

ST-R2
This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models.  The docking posts
attach to the front two mounting holes in the fender rail. (5 5/8 apart)� May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1�
2006-2008 FXST, FXSTB, FXSTS and 2007-2008 FLSTF ST-R2

ST-R2HB
This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Detachable Backrest.� This is the same bracket as the ST-R2 but comes with different hardware.
2006-2008 FXST, FXSTB, FXSTS and 2007-2008 FLSTF ST-R2HB

ST-R2DB
With Detachable Backrest

Used on 2006 FXST, FXSTB and FXSTS and 2007 FLSTF models with Detachable Backrest. This is the same bracket as the ST-R2 but comes with different hardware. hardware.
2006 FXST, FXSTB, FXSTS and 2007 FLSTF ST-R2DB

DUC-R1 & DMS-EB all years
This models is used on the deuce, all years. "The Deuce" DMS-EB is a special bracket to be used on the Deuce. The mounting system is a formed chrome plate mounted under the fender rail on the deuce to provide mounting points for the Easy Brackets. The original turn signals remain in the factory location.
Fits all model years DUC-R1 & DMS-EB

HARLEY DAVIDSON - Heritage Softails.

For use with Heritage Softails that are using existing Harley Davidson Heritage saddlebags only. Will not work with stock Heritage Springer saddlebags.
HRT-R1
Fits all Heritage Softails 1999 and older. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system.
  1999 and older HRT-R1

HRT-R1DB
Fits all Heritage Softails 1999 and older. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
1999 and older HRT-R1DB

HRT-R2
Fits Heritage Softails 2000 through 2002. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system.
2000 through 2002 HRT-R2

HRT-R2DB
Fits Heritage Softails 2000 through 2002. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
  2000 through 2002 HRT-R2DB

HRT-R3
Fits 2003 Heritage Softails. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system.
2003 HRT-R3

HRT-R3DB
Fits 2003 Heritage Softails. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
2003 HRT-R3DB

FLH / Shovelhead
Older Harley Davidson FLH Models. This model is used on the older FLH models. The docking posts attach to the two mounting holes in the fender rail. Holes must be 7 1/4" center to center.
FLH-R1

FXR-R1
FXR & FXLR Models 90 & later. Note: Does not fit FXRP. This model is used on the FXR models. The docking posts attach to the front hole in the fender rail and the turn signal hole after the turn signal is relocated off the fender rail. Note: Turn signals must be relocated off the fender on all FXR models. Great Bike Gear does not currently offer a turn signal relocation kit for this model. This model is typically used with small to medium saddlebags.
  1990 and later FXR-R1

HARLEY DAVIDSON - Sportster 

Sku#

  • XL 883R
  • XL 883L� Low
  • XL� 883
  • XL� 883 Hugger
  • XL 883C� Custom
  • XL 1200C� Custom
  • XL 1200R� Roadster
  • XL 1200L
Model Number Model Year Model Picture
SPT-R1S
94 to 03 "Slimline"
This model is used on all sportsters 94 to 03. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Turn signal relocation kits available.
94 to 03 "Slimline" SPT-R1S

  SPT-R1
This model is used on all sportsters 94 to 03. Works with or without hard mount backrest. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R1S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. Turn signal relocation kits available.
1994 to 2003 SPT-R1

SPT-R1DB
94 to 03 with Detachable Backrest

This is the same bracket as the SPT-R1 but is used with a Detachable Backrest and comes with longer bolts.
2004-2003 SPT-R1DB

SPT-R2S
04 and later "Slimline"

This is the same bracket as the SPT-R1S but comes with different hardware due to changes made in 2004. Fits 04 & later.
04 and later "Slimline" SPT-R2S

SPT-R2
This is the same bracket as the SPT-R1 but comes with different hardware due to changes made in 2004. Fits 04 & later.
2004 and later SPT-R2

  SPT-R1SDB
This is the same bracket as the SPT-R2S but is used with a Detachable Backrest and comes with different hardware.
    SPT-R1SBD

SPT-R2SDB
This is the same bracket as the SPT-R2S but is used with a Detachable Backrest and comes with different hardware.
  2004 and later with detachable backrest SPT-R2SDB

Fits Harley Davidson Sportster motorcycles. Allows easy installation and removal of leather saddlebags with no tools in seconds. Includes locking device. Does not require the use of saddlebag support brackets.

HARLEY DAVIDSON - DYNA

Sku#

  • FXD/FXDI Super Glide (96 to Present) (2005 Hard Mount Backrest use DNA-L1SG)
  • FXDC/FXDCI Super Glide Custom (96 to Present)
  • FXDL/FXDLI Low Rider (96 to Present)
  • FXDX/FXDXI Super Glide Sport (96 to 2005)
  • FXDXT/FXDXTI Sport Touring (96 to 2005)
  • FXDWG/FXDWGI Wide Glide (96 to Present)
  • FXDI35 35th Anniversary Super Glide 2006
  • FXDBI Street Bob 2006
  • FXR-R1
Model Number Model Year Model Picture
DNA-R1
Used on all Dyna models 96 to 2005. The docking posts attach to the front existing bolt hole and the turn signal hole after the turn signal is relocated. Turn signals is relocated off the fender to use all DNA models. Turn signal relocation kits available.
1996 to 2005 DNA-R1

DNA-R1HB
With hard mounted backrest
Used on all Dyna models 96 to 2005 with Hard Mount Backrest. This is the same bracket as the DNA-R1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.
1996 to 2005 DNA-R1HB
Choose

DNA-L1DB
All models 96 to 2005 with detachable backrest

This model is used on all Dyna Models 96 to 2005 with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.
  1996-2005 DNA-L1DB

  DNA-L1SG
FXD 2005 Dyna Super Glide with Hard Mount Backrest.
Backrest. This is the same bracket as the DNA-L1DB but comes with different bolts.
FXD 2005 Dyna Super Glide with Hard Mount Backrest DNA-L1SG

DNA-L2
2006 only
Fits 2006 and later Dynas with or without Hard Mount Backrest except FXDWGI. Turn signals must be relocated off the fender al models. Turn signal relocation kits available.

2006

DNA-L2

DNA-L2DB
With Detachable Backrest

Fits all 2006 Dynas except FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

2006

DNA-L2DB

HARLEY DAVIDSON - FXDWGI� Dyna Wide Glide 2006 & later and FXDF Fat Bob 2008 & later

DNA-L3
2008 Fat Bob and�
2006 FXDWGI

Fits 2006 FXDWGI with or without Hard Mount Backrest.

2006 FXDWGI

DNA-L3

DNA-L3DB
2008 Fat Bob with Detachable backrest
With Detachable Backrest 2006 FXDWGI

Fits all 2006 Dynas FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

2006 FXDWGI

DNA-L3DB

DNA-L3DB
With Detachable Backrest 2006 FXDWGI

Fits all 2006 Dynas FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

2006 FXDWGI

DNA-L3DB

DUC-R1
For use will all Duece models. Turn signals remain in factory location. Must be used with a mounting kit, manufactured and sold separately. Please check with us for further detail
DUC-R1

  FXR-R1     FXR-R1

Fits selected Harley Davidson Dyna models. Allows easy installation and removal of leather saddlebags with no tools in seconds. Includes locking device. Does not require the use of saddlebag support brackets. One hundred year anniversary bags for the FXDWG will not work.

INDIAN - Motorcycles

Sku# Model Model Number Model Year Model Picture
SS-R1
SCOUT and SPIRIT
Fits on Indian Scout and Indian Spirit. Will not fit on Indian Chief.
All Years SS-R1

CHF-R1
CHIEF
Fits on Indian Chief. Will not fit on Indian Scout or Indian Spirit.

CHF-R1

EXCELSIOR HENDERSON - Motorcycles

Sku# Model Model Number Model Year Model Picture
EH-R1
This model is used on the Excelsior Henderson. The docking posts attach to the two mounting holes in the fender rail.
All Years EH-R1

Fits Excelsior Henderson frames. Allows easy installation bags on Excelsior Henderson frames in seconds. Easy installation requires no tools. Includes locking device. Does not require the use of saddlebag support brackets.

KAWASAKI - Motorcycles

Sku# Model Model Number Model Year Model Picture
VC-R1
Will fit on Kawasaki Vulcan Classic 1500. Attaches to the two (2) existing bolt holes on the fender rail.
  VC-R1

VC-R1BR
Will fit on Kawasaki Vulcan Classic 1500 with a backrest. Attaches to the two (2) existing bolt holes on the fender rail.
VC-R1BR

VC-R2
Vulcan Classic 1600: The docking posts attach to the two mounting holes in the fender rail. Note: Helmet lock must be removed.

VC-R2

VC-R3
Vulcan Classic 2000: The docking posts attach to the two mounting holes in the fender rail. Note: The side reflectors and helmet lock must be removed from the fender.
VC-R3

VC-R3BR
Vulcan classic 2000 with Backrest: Backrest purchased separately. Will not work with Grabrail.
VC-R3BR

V800-R1
Vulcan Classic 800: The docking posts attach to the two mounting holes in the fender rail.

1996 to Present V800-R1

V900-R1
Vulcan Classic 900:
The docking posts attach to the two mounting holes in the fender rail.

1996 to Present V900-R1

  V800-R1BR     V800-R1BR

  V900-R1BR     V900-R1BR

  VC-R2BR     VC-R2BR

HONDA- Motorcycles

Sku# Model Model Number Model Year Model Picture

Magna

MGA-R1
Honda Magna

MGA-R1 Attaches to the two (2) existing bolt holes in the fender rail.
MGA-R1

MGA-R2BR
Honda Magna

Magna with Backrest: This model comes with longer bolts.
MGA-R2BR

Shadow

ACE-R1
Honda Ace 750

ACE-R1 Attaches to the two (2) existing bolt holes in the fender rail.

All Years

ACE-R1

  ACE-R1BR     ACE-R1BR

ARO-R1
Fits Honda Aero 1100

All Years ARO-R1

ARO-R2
Aero 750: The docking posts attach to two rear mounting holes in the fender rail.

All Years ARO-R2

 

ARO-R2BR
Aero 750 with Backrest: This model comes with longer bolts.

  All Years ARO-R2BR

SABR-R1
Sabre 1100: The docking posts attach to the rear two mounting hols in the fender rail.
All Years SABR-R1

SABR-R2BR
Sabre 1100 with Backrest: This model comes wtih longer bolts.
All Years SABR-R2BR

  VLX-R1     VLX-R1

  Spirit     Spirit

  SPRT-R1     SPRT-R1

  SPRT-R1BR     SPRT-R1BR

Valkyrie

VKE-R1
Fits Honda Valkyrie

All Years VKE0-R1

VTX

 
  • VTX-1300C & 1800C models
  • VTX-1800F Model
     
VTX-C1
Fits Honda VTX 1800 Classic only and VTX 1800 and 1300 ClassicAttaches to the two (2) rear existing bolt holes in the fender rail. If you have a Hondaline Backrest, please use kit VTX-C1BR.
All Years VTX-C1

VTX-C1BR
Fits Honda VTX 1800 Classic w/ Hondaline Deluxe Backrest. See attached drawing for ordering instructions.Will not work with other Backrest Models. A special plate allows you to mount the docking posts right to the backrest, keeping everything close to the motorcycle.

(Click to enlarge)
All Years VTX-C1BR

VTX-C1BR-1
VTX-C Model with Hondaline Deluxe Backrest only. See attached drawing for ordering instructions. This model is used on the 1800 VTX-C Model with a�Hondaline backrest. Backrest not provided, must be purchased separately. The docking posts attach to the backrest.� This kit comes with a special mounting plate for installation on the backrest.

(Click to enlarge)
All Years VTX-C1BR-1

VTX-C1CBR
1300 & 1800C Model & 1800F Model with Cobra Backrest only: Backrest not provided, must be purchased separately.

 

All Years VTX-C1CBR

VTX-C1PDB
1300 & 1800C Model & 1800F Model with Paladin Backrest only: Backrest and hardware not provided, must be purchased separately.

 

All Years VTX-C1PDB

  VTX-C2     VTX-C2

  VTX-C2PDB     VTX-C2PDB

  VTX-R2CWBR     VTX-R2CWBR

  • VTX 1300R & 1800R Models
  • VTX 1800N Model
  • VTX 1300S Model
VTX-R2
Fits Honda VTX 1800 Retro and 1300 Retro. Also fits VTX-1800 Neo with no backrest. Attaches to the two (2) rear existing bolt holes in the fender rail. If you have a Hondaline Backrest, please use kit VTX-R2BR.
Will fit the VTX-1800 Neo with the Neo backrest but you must drill a hole thru the Neo backrest hardware in order to expose the rear fender bolt.
All Years VTX-R2

VTX-R2BR
Fits Honda VTX 1800 Retro with the Retro Honda Line backrest only and 1300 Retro w/ Hondaline Deluxe Backrest. Will not work with other Backrest Models. Attaches to the two (2) rear existing bolt holes in the fender rail.

  All Years VTX-R2BR

 

VTX-R2PDB
VTX-Retro with Paladin Backrest: This model is used on the 1800 and 1300 R, N & S Models with a Paladin backrest. Backrest and hardware not provided, must be purchased separately.

  All Years VTX-R2PDB

 

VTX-R2CBR
VTX-Retro with Cobra Backrest: VTX-Retro with Cobra Backrest. This model is used on 130 and 1800R, N & S Models with Cobra Backrest only. Backrest not provided, must be purchased separately.

All Years VTX-R2CBR

 

SUZUKI - Motorcycles

Sku# Model Model Number Model Year Model Picture
VOL-R1
Boulevard C50 & M50 (Volusia):
The docking posts attach to the two mounting holes in the fender rail.
VOL-R1

VOL-R1BR
Boulevard C50 & M50 with backrest:
This is the same as the VOL-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.
  VOL-R1 BR

SI-R1
Boulevard C90 (Intruder):
The docking posts attach to the two mounting holes in the fender rail.
SI-R1

  C109-R1     C109-R1

  C109-R1CBR     C109-R1CBR

  VOL-R1CBR     VOL-R1CBR

YAMAHA - Motorcycles

Sku# Model Model Number Model Year Model Picture

Royal Star and Road Star

YMA-R2
Royal Star & Road Star 1600 or 1700: The docking posts attach to the two mounting holes in the fender rail. This model will not work with the Silverado.
All years YMA-R2

YMA-R2BR
Royal Star & Road Star 1600 or 1700 with Backrest: This is the same bracket as the YMA-R2 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately. This model will not work with the Silverado backrest.
All Years YMA-R2BR

Roadliner

YMA-R3
Roadliner: The docking posts attach to the two mounting holes in the fender rail.
All years YMA-R3

YMA-R3BR
Roadliner with Backrest: This is the same backrest as the YMA-R3 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.
All Years YMA-R3BR

  YMA-R4BR     YMA-R4BR

  YMA-R5     YMA-R4BR

  YMA-R5CWBR     YMA-R5CWBR

  YMA-R2DB     YMA-R2DB

  Y650-CUBR     Y650-CUBR

  V950-R1     V950-R1

  V950-R1CBR     V950-R1CBR

Warrior

WAR-R1
Warrior: The docking posts attach to the two mounting holes in the fender rail. NOTE: The stock exhaust should be replaced to provide adequate clearance for standard size saddlebags.
All Years WAR-R1

V-Star Classic & Custom

YMA-R1
V-Star 1100 Classic & 1100 Custom: The docking posts attach to the two mounting holes in the fender rail.
All Years YMA-R1

YMA-R1BR
V-Star 1100 Classic & 1100
custom with Backrest: This is the same bracket as the YMA-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

All Years

  YMA-R1BR

YMA-R4
V-Star 1300 Classic 2007 and Later
: The docking posts attach to the two mounting holes in the fender.

2007-Later

  YMA-R4

V-Star 650 Classic

Y650-CL
V-Star 650 Classic:
The docking posts attach to the two mounting holes in the fender rail.
All Years  Y650-CL

Y650-CU
V-Star 650 Custom: The docking posts attach to the two mounting holes in the fender rail. NOTE: The turn signal may need to be relocated depending on teh size of the saddlebag used.

All Years

Y650-CU

VICTORY - Motorcycles

Sku# Model Model Number Model Year Model Picture

Vegas and Kingpin

VEG-R1
Vegas and the Kingpin: The docking posts attach to the two mounting holes in the fender rail.
All Years VEG-R1

V92C

VP-R1
V92C:
This model is used on the V92C with various accessories. The kit comes with all necessary hardware to install with stock fender, fender rail or modular rack system or fender rail/backrest combination. The docking posts attach to the two center mounting holes in the fender rail.
All Years VP-R1

Hammer

HAM-R1
Hammer and the Jackpot:
The docking posts attach to the two mounting holes in the fender rail.
All Years HAM-R1

Fits Victory frames. Allows easy installation bags on Polaris frames in seconds. Easy installation requires no tools. Includes locking device. Does not require the use of saddlebag support brackets.

Triumph :: Speedmaster / America / Rocket III

Sku# Model Model Number Model Year Model Picture
TRI-R1
Fits on Triumph Speedmaster / America. For use with small to medium saddlebags (12" to 14" wide). Attaches to the rear two holes in the fender rail.

All Years TRI-R1

TRI-R1BR
Speedmaster / America
This is the same bracket as the TRI-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

All Years TRI-R1BR

TRI-R2
Rocket III
The docking posts attach to the two mounting holes in the fender rail.

 

All Years TRI-R2

  TRI-R3     TRI-R3

  TRI-R3DB     TRI-R3DB

 

These are a great addition to any rider who wants to be able to strap things down on his bike. We have designed these straps to be able to stretch almost three times their original size. This helps you strap down anything from a pair of gloves to a large leather jacket. They are made of a very thick, latex material that will not scratch your paint or your chrome. The positive lock ends allows you to strap down your gear without worrying about the straps coming off, once they are on, they are on. We make two sizes, 12" and 17" and they come 4 to a pack. All of our quick detachable bags come the 4 d-rings on the lid to allow you to strap down your gear to the top of the bags.


Check out our gallery. We have thousands of satisfied customers who have taken the time to send a photo of their bike with our bags on them. We have hundreds of images of almost all of our designs on almost every bike made. Click on this link or go to the top of the page and click on the gallery and browse around. You will see how different sizes fit different models and it should help you find the best fit for your bike.

 

Return Policy Links

 

Check out all of our new products. We update and change our products almost everyday. If you do not see what you want, simply come back in a day or two and you will see that we have added more products. We are constantly updated our prices, having sales and offering discounts, so keep checking back with us.  Have you checked out our accessory  page? We not only have great products that we manufacture, we also carry hundreds of other products in our accessory page.

Custom Classic Saddlebags

24249 Sargeant Rd. Ramona CA 92065
Ph:(858) 213-6643

Privacy Policy & Statement

©2005 Custom Classic Saddlebags

.